The Atom-D is a part dryer that can be used to dry a part after machining or washing. Instead of using a pneumatic air blast to dry the part, the Atom-D offers an alternative method of drying. This can help to avoid any potential issues that may arise from using a pneumatic air blast, such as damage to the part or the potential for debris to become airborne. The Atom-D provides a more controlled and efficient way to dry parts, ensuring that they are ready for use in a timely and reliable manner.
Size | Width = 700 mm , Depth = 400 mm, Height = 1200 mm |
---|---|
Weight | 70 Kgs |
Electrical | Single Phase , 230V 50 Hz , 2 KW during drying. |
Drying Action | Drying action is cause by vacuum suction at the bottom and air blowing from the top. The whole system is to avoid an debris to fly out. |
Coolant collection | Coolant or media cleaned out from the part is collected in the tank which can be drained out.There is a auto cut off when coolant tank gets filled up |
Cycle time | Cycle time is settable from 0 to 999 seconds. |